Shop by Category
Browse by Manufacturer
Browse Manufacturers
Shopping Cart
Your cart is empty.

Badger 350-4 Single Action Airbrush Kit with Hose & Badger Whirlwind 180-10 Compressor

List Price: $291.00
Our Price: $259.00
Item Number: bad-350-4-bad-180-10
Manufacturer: Badger
Manufacturer Part No: 350-4-180-10
    The Model 350 single action external mix bottom feed airbrush. The air and paint mix outside the airbrush creating a larger and coarser "dot" pattern and providing a heavier spray volume. The Model 350 is superb for base coating, stenciling, stippling, touch up projects, etc. The Model 350 is constructed of high-impact nylon and sprays a higher viscosity of materials. It is solvent and chemical resistant. The Model 350 sprays high viscosity materials such as ceramic glazes and stains and hobby enamels with ease. It is also effectively used with properly reduced acrylics, inks, dyes, watercolors, acrylic lacquers, enamels - all of Badger airbrush ready paints. An excellent choice for beginning students, hobbyists, ceramists and automotive painters.

  • Choice of 3/4oz.(22ml), 2oz.(60ml) or 3oz.(90ml) paint jars or 1/4oz.(7ml) free-standing color cup
  • Color cup and one-piece jar adaptor taper-fit for quick color changes
  • Sprays higher viscosity materials
  • Excellent for more voluminous spray projects
  • Constructed of high-impact nylon
  • Solvent and chemical resistant
  • Nozzles/needles made of precision manufactured metals
  • Fine (F) - 1/8(3mm) to 2(51mm) spray pattern
  • Medium (M) - 1/4(6mm) to 2(63mm) spray pattern
  • Heavy (H) - 1/2(12mm) to 3(76mm) spray pattern
350-4 Set contains
  • 350 Medium airbrush with attachable jar
  • Braided air hose with varying air source fitting
  • Additional jar with cover
  • oz. color cup
  • Fine and Heavy nozzles and fluid assemblies
  • Wrench for needle assembly
  • Instruction manual
  • corrugated box
Badger 180-10 WHIRLWIND
This compressor never needs oil or lubrication. On/off switches (not available on Badger's previous diaphragm compressors) are conveniently located directly on the units. Four attached suction cup feet eliminate compressor movement. Each unit operates one airbrush, with a pressure of 30 PSI for most airbrushes. Portable and light, weighing only 9 pounds,this compressor includes a durable 6' cord with three prong plus and a 1/10 horsepower motor. A full one-year warranty and ETL Certification is included.
    Portable 1/12 HP oil-less diaphragm type compressor has internal bleed, allowing use with any make air brush. It is compact, lightweight and quiet and can be carried form room to room. Maximum running pressure approximately 28 PSI. (1.93 bar)

Additional Specifications:
  • Motor: 115 volts, 60 Hz, 2.5 amp
  • Dimensions: 8-1/4" L X 4-3/4" W x 7" H (21 X 12 X 18 cm)
  • 22.5L/min @ 1.38 bar
  • On/off switch
  • Diaphragm compressor, never needs oil or lubrication
  • Suction cup feet reduces compressor movement
  • Portable, weighing only 9 pounds
  • 1/10 horsepower, 2 cfm
  • Operating pressure of 30 PSI
  • Durable 6' cord with three prong plug
  • Operates one airbrush
  • ETL Certification
  • One year warranty

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)