Search
Shop by Category
 
Browse by Manufacturer
Browse Manufacturers
Shopping Cart
Your cart is empty.

Createx Kent Lind Cool Set of 8 Createx Airbrushing colors


Our Price: $26.00
Item Number: ctx-5815
Manufacturer: Createx Paints
Manufacturer Part No: 5815
Createx 2 oz Kent Lind Cool Set of 8 Colors



Item # 5815-00

Includes 4oz. each: 5102 Violet 5105 Caribbean Blue 5106 Brite Blue 5 108 Deep Blue

5134 Maui Blue 5211 Opaque Black 5212 Opaque White 5405 Fluorescent Yellow





AIRBRUSH COLOR TYPES

Transparent
For white and light colored surfaces only.Add Opaque Medium for opacity or to create pastel colors. May be intermixed with all other Createx Airbrush Colors.

Fluorescent
For white and light colored surfaces. For coverage on dark surfaces, base coat surface with Opaque White. Mix with transparent, pearlized, or other fluorescent colors.

Opaque
For both light and dark colored surfaces. Add Airbrush Extender to increase transparency. Add Opaque Medium to create pastel colors. May be mixed with other opaque or transparent colors.

Pearlized
Covers both light and dark colored surfaces. Colors have a shimmering metallic finish. Mix with other pealized, transparent, fluorescent, iridescent, and chameleons.

Iridescent
Covers both light and dark colored surfaces. Colors have a shimmering metallic look which changes at the angle of light. Mix with other iridescent, pearlized, transparent, or fluorescent colors.


SURFACE PREPARATION

Fabric - Including 100% cotton, 50/50 blends, denim, sweatshirts, and most natural fibers.
1) For best results, wash item first to remove sizing and mill finishes.
2) Airbrush the design onto fabric avoiding thick buildup of paint and excessive paint layering.
3) Allow colors to dry, or a heat gun may be used to accelerate drying time. Drying time varies depending on application.
4) Heatset fabric for permanence by one of the following methods:

a) Iron for 2 minutes at 300oF use a protective cloth, keep iron moving.
b) Turn item inside out and put in clothes dryer for 40 minutes at highest heat.


Leather
1) Clean leather by wiping with mineral spirits or rubbing alcohol.
2) For best results, lightly spray mist a base coat of Opaque White on areas to be sprayed.
3) Apply color, avoiding over saturation and excessive paint layering.
4) Allow colors to dry thoroughly before heat setting.
5) Iron for 30 seconds at 225oF using a protective cloth, or use a hot air gun at highest level for five minutes.

Paper and Canvas
1) Apply Color, avoiding thick buildup.
2) When using high tack frisket, dilute colors 25% with water. Colors are permanent when dry.

Wood
1) Prepare surface by lightly sanding, wipe clean.
2) Apply color, avoiding thick buildup of paint. Allow colors to dry for 24 hours before applying clear finish.

Ceramics and Clay
1) Apply color in thin even coats, avoid thick buildup.
2) Do not exceed temperatures of 300oF when baking. Colors are permanent for handling after 24 hrs.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)