Shop by Category
Browse by Manufacturer
Browse Manufacturers
Shopping Cart
Your cart is empty.

Createx Opaque Airbrush Paint - 8 oz.

Createx Opaque Airbrush Paint
Please call for availability.
Manufacturer: Createx Paints
Manufacturer Part No: 5200-8

Product Options

Opaque Colors

Opaque Colors are solid colors intended to cover underlying colors and surfaces with 2 – 3 coats. Opaque Colors make excellent base colors. For many projects, starting with either Opaque White or Black works best as other colors types will cover quicker with vivid, brighter effects compared to applying colors, for example Pearlized or Transparent, direct to substrate without base of opaque White or Black. Opaque colors work best with larger tip-sized airbrushes operated at higher PSI settings. For fine lined detail, lower PSI settings and small tip-sizes, Transparent Colors work best.

5201 5201 - Opaque Blue
5202 5202 - Opaque Purple
5203 5203 - Opaque Lilac
5204 5204 - Opaque Yellow
5205 5205 - Opaque Light Green
5206 5206 - Opaque Aqua
5207 5207 - Opaque Sky Blue
5208 5208 - Opaque Coral
5210 5210 - Opaque Red
5211 5211 - Opaque Black
5212 5212 - Opaque White

Createx Airbrush Colors are ready to use professional grade airbrush colors which are manufactured with the highest quality control standards. Createx uses the finest pigments available and the colors have a brightness and richness unmatched by others. These colors can be used on a variety of surfaces (i.e. fabrics, leather, canvas, paper, wood, ceramics, and clay) with permanent results.
Createx Colors also produces airbrush additives and mediums which allow artists to "customize' the colors for specific applications.
Transparent, Fluorescent, and Opaque Colors are available in: 2 oz., 4 oz., 8 oz., 16 oz., 32 oz. and gallon sizes. Pearlized and Iridescent Colors are available in 2 oz., 4 oz. 8 oz, 16 oz. and gallon sizes.

For white and light colored surfaces only.Add Opaque Medium for opacity or to create pastel colors. May be intermixed with all other Createx Airbrush Colors.
For white and light colored surfaces. For coverage on dark surfaces, base coat surface with Opaque White. Mix with transparent, pearlized, or other fluorescent colors.
For both light and dark colored surfaces. Add Airbrush Extender to increase transparency. Add Opaque Medium to create pastel colors. May be mixed with other opaque or transparent colors.
Covers both light and dark colored surfaces. Colors have a shimmering metallic finish. Mix with other pearlized, transparent, fluorescent, iridescent, and chameleons.
Covers both light and dark colored surfaces. Colors have a shimmering metallic look which changes at the angle of light. Mix with other iridescent, pearlized, transparent, or fluorescent colors.


Fabric - Including 100% cotton, 50/50 blends, denim, sweatshirts, and most natural fibers.
  1. For best results, wash item first to remove sizing and mill finishes.
  2. Airbrush the design onto fabric avoiding thick buildup of paint and excessive paint layering.
  3. Allow colors to dry, or a heat gun may be used to accelerate drying time. Drying time varies depending on application.
  4. Heatset fabric for permanence by one of the following methods:
a) Iron for 2 minutes at 300°F use a protective cloth, keep iron moving.
b) Turn item inside out and put in clothes dryer for 40 minutes at highest heat.

  1. Clean leather by wiping with mineral spirits or rubbing alcohol.
  2. For best results, lightly spray mist a base coat of Opaque White on areas to be sprayed.
  3. Apply color, avoiding over saturation and excessive paint layering.
  4. Allow colors to dry thoroughly before heat setting.
  5. Iron for 30 seconds at 225°F using a protective cloth, or use a hot air gun at highest level for five minutes.
Paper and Canvas
  1. Apply Color, avoiding thick buildup.
  2. When using high tack frisket, dilute colors 25% with water. Colors are permanent when dry.
  1. Prepare surface by lightly sanding, wipe clean.
  2. Apply color, avoiding thick buildup of paint. Allow colors to dry for 24 hours before applying clear finish.
Ceramics and Clay
  1. Apply color in thin even coats, avoid thick buildup.
  2. Do not exceed temperatures of 300°F when baking. Colors are permanent for handling after 24 hrs.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)