Search
Shop by Category
 
Browse by Manufacturer
Browse Manufacturers
Shopping Cart
Your cart is empty.

Createx Wicked 2oz. Sampler Set #2 Createx Airbrush Paints


List Price: $42.91
Our Price: $36.00
Item Number: ctx-w102
Manufacturer: Createx Paints
Manufacturer Part No: w102
Createx Wicked 2oz. Sampler Set #2


Item # W102-00

Includes 2oz. each: W030 Opaque White W002 Black W005 Red W006 Violet W007 Blue W009 Pthalo Green W011 Golden Yellow W100 Reducer

Wicked Colors

Wicked Colors is an ultra-high performance, multi-surface airbrush paint suitable for any substrate from fabric to automotive applications. Wicked Colors are perfect for t-shirts, automotive graphics, illustration and most any application. Wicked contains mild amounts of solvent inter-mixed with a durable, exterior-grade resign and automotive pigments for an extremely durable paint that withstands direct, prolonged exposure to outdoors elements without washing or fading.

Wicked Colors have exceptional flow and atomization right out of the bottle with most airbrush tip-sizes, including 0.2mm detail tips. Wicked Colors may be reduced with W100 Reducer or Auto Air 4011 Flash Reducer in any ratio for improved flow, atomization and customizing viscosity preferences.

All Wicked Colors are made with the same highly durable binder.  Wicked Colors are sheered to a binder size of 0.5 microns and dry semi-gloss level of 70+ degrees.  Wicked Detail Colors are sheered to a particle size of 0.1 microns and dry to a flat finish of 30+ degrees, perfect for illustrators as a flat finish reflects the color’s true hue.

For automotive refinishing, a durable, catalyzed urethane clear is recommended. Wicked Colors cure to a strong film with air drying alone. Heat may be used to further assist curing and is recommended for t-shirts and fabrics intended for use with multiple washings. Heat is not required for automotive, illustration and most other applications. For more application information, visit our website’s technical pages.


AIRBRUSH COLOR TYPES

Transparent
For white and light colored surfaces only.Add Opaque Medium for opacity or to create pastel colors. May be intermixed with all other Createx Airbrush Colors.

Fluorescent
For white and light colored surfaces. For coverage on dark surfaces, base coat surface with Opaque White. Mix with transparent, pearlized, or other fluorescent colors.

Opaque
For both light and dark colored surfaces. Add Airbrush Extender to increase transparency. Add Opaque Medium to create pastel colors. May be mixed with other opaque or transparent colors.

Pearlized
Covers both light and dark colored surfaces. Colors have a shimmering metallic finish. Mix with other pealized, transparent, fluorescent, iridescent, and chameleons.

Iridescent
Covers both light and dark colored surfaces. Colors have a shimmering metallic look which changes at the angle of light. Mix with other iridescent, pearlized, transparent, or fluorescent colors.


SURFACE PREPARATION

Fabric - Including 100% cotton, 50/50 blends, denim, sweatshirts, and most natural fibers.
1) For best results, wash item first to remove sizing and mill finishes.
2) Airbrush the design onto fabric avoiding thick buildup of paint and excessive paint layering.
3) Allow colors to dry, or a heat gun may be used to accelerate drying time. Drying time varies depending on application.
4) Heatset fabric for permanence by one of the following methods:

a) Iron for 2 minutes at 300oF use a protective cloth, keep iron moving.
b) Turn item inside out and put in clothes dryer for 40 minutes at highest heat.


Leather
1) Clean leather by wiping with mineral spirits or rubbing alcohol.
2) For best results, lightly spray mist a base coat of Opaque White on areas to be sprayed.
3) Apply color, avoiding over saturation and excessive paint layering.
4) Allow colors to dry thoroughly before heat setting.
5) Iron for 30 seconds at 225oF using a protective cloth, or use a hot air gun at highest level for five minutes.

Paper and Canvas
1) Apply Color, avoiding thick buildup.
2) When using high tack frisket, dilute colors 25% with water. Colors are permanent when dry.

Wood
1) Prepare surface by lightly sanding, wipe clean.
2) Apply color, avoiding thick buildup of paint. Allow colors to dry for 24 hours before applying clear finish.

Ceramics and Clay
1) Apply color in thin even coats, avoid thick buildup.
2) Do not exceed temperatures of 300oF when baking. Colors are permanent for handling after 24 hrs.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)